)(
*><
-Operator
Not
Authorized
This message means
that
your
display station
is
not
authorized to do the
re-
quested printer-related function. Press the RESET key to restore the keyboard.
Appropriate follow-on action depends upon the key
you
used and upon what
appears in the printer assignment positions on the right side
of
the Operator
Information Area.
1.
After the Print (
D-Q
) key:
•
If
CJ-CI??
is
displayed, you should press RESET and then use the
IDENT key to cause
your
new assignment to be displayed before
you
request a print.
• If nothing
is
displayed and a
~
is
not displayed in the Operator
Information Area,
you
are
not
authorized to print at all. Press the RESET
key to restore the keyboard and take other action.
•
If
nothing
is
displayed and a
~
is
displayed in the Operator Information
Area, you have no automatic authorization.
Press the RESET key to
restore the keyboard. If a printer
is
available, you can establish an
assignment by using the IDENT key, plus two valid numerals.
•
If
CJ-CInn
is displayed, there is an error [mismatch?] in the authoriza-
tion matrix (for example, the printer's buffer
is
too
small for your display
size, or Device
"nn"
is
really a display,
not
a printer). Press the RESET
key to restore the keyboard. Request assistance, use the IDENT function
to select a different printer, or take other action.
2.
After the IDENT key plus two numerals:
You are not authorized for the printer you specified. Press the RESET key
to restore the keyboard;
then
start the IDENT procedure again or take other
action.
3.
Immediately after the IDENT key:
You are
not
authorized
to
print at all (a
~
is
not displayed in the
Operator Information Area and nothing in printer assignment columns).
Press the RESET key to restore the keyboard, and take other action.
)(
0-.,
-Security Key
This message means the security keylock on your display station
is
off. Turn
the key clockwise.
)(
*g'('-
Questionable Card
This message appears during a magnetic slot reader or magnetic hand
scanner operation if the magnetic stripe card cannot be used. Press the
RESET key to restore your keyboard;
then
try another card or request help.
)(
*
...
+':--
,)(
*
...
+':;',)( 1::.'+,?,)( *
.....
+'?,)(
*
..
+'?-
Accent Plus What? (Canadian French Keyboard Only)
This message means
you
have entered an invalid accent and character combina-
tion so the accent has become a stand-alone character.
Press the RESET key to
restore your keyboard; then re-key
both
the accent and the letter. See the Dead
Key descriptions in the keyboard section.
Chapter
2.
Controls and Indicators 2-25
To Next Page
Loading...
