IBM 5100 Basic Reference Manual

32
REWIND [dev-address]
REWIND COMMAND
The REWIND command allows you to rewind the specified tape unit. The syntax
.
of the REWIND command is as shown:
REWIND [dev-address]
where:
Example
dev-address is the address of the tape unit to be rewound (E80 for the built-in
tape
unit or E40 for the auxiliary tape unit). The default is E80.
A
sample REWIND command is as shown:
REWIND E40
/ '
I
\" /'

IBM 5100 Specifications

General

Brand	IBM
Model	5100
Category	Laptop
Language	English