IBM 6360 User Manual

LARGE DISPLAY SERVICE INFORMA-
TION
DANGER:
Operati ng voltages up to 17,000 volts
are present inside the Large
Display. A bleeder circuit is pro-
vided. You must wait at least 10
seconds after power is tu rned off for
the voltages to reach a safe level
(less than 60V).
Figure 4-10. CRT Ground Spring
Whenever the rear cover is' removed
from
the large display , ALWAYS
ensure that the CRT (Cathode Ray Tube)
ground spring is in place and that it
is connected to the· CRT socket O ..
(See Figure 4-10.) Do this before any
type of service is performed.
Use the CRT Anode Discharge Procedure
whenver continuity checks are made,
and during removal/replacement proce-
dures. This will ensure that no high
voltage is present.
Chapter 4. Large Display 4-9

IBM 6360 Specifications

General

Brand	IBM
Model	6360
Category	Desktop
Language	English