Switch Information
When you select Switch Information from the Configuration menu, a window
similar to the following opens:
To establish the basic switch settings, enter a name for the switch in the System
Name field, the physical location of the switch in the System Location field, and
the name of the contact person responsible for the switch in the System Contact
field. Then, click Apply.
The data fields on the Switch Information window are described as follows:
Device Type
A description of the switch type.
MAC Address
The Ethernet address for the device.
Boot PROM Version
Version number for the firmware startup code.
Firmware Version
Version number of the firmware code installed on the switch. This can be
updated by using the Update Firmware window in the Reset and Update
section of the Switch Information window.
Hardware Version
Version number of the hardware installed on the switch.
System Name
A user-assigned name for the switch.
System Location
A user-assigned description for the physical location of the switch.
System Contact
The name of the person to contact regarding any problems or questions
with respect to the switch. You might also want to include a phone number
or extension.
Chapter 5. Web-Based network management 35
To Next Page
Loading...
