This window displays the applicable configuration information for all the internal and
external ports on the switch module, based on the configuration settings that you
selected or accepted in “Configure Ports” on page 38. Ports are not selectable on
this window and, the information on this window is not changeable. To change the
configuration settings for the ports on the switch module, see “Configure Ports” on
page 38.
Switch Settings
When you select Switch Setup from the Configuration menu and Switch Settings
from the Switch Setup menu, a window similar to the following opens:
The user-changeable parameters on this window are as follows:
Switch GVRP <Disabled>
Group VLAN Registration Protocol is a protocol that enables members to
dynamically join VLANs. This is used to enable or disable GVRP on the
switch module.
MAC Address Aging Timer <Enabled>
This field specifies whether the aging timer is on or off.
Chapter 5. Web-Based network management 39
To Next Page
Loading...
