Enter the Path and File Name of the desired file or use the Browse button to
access recently used entries. Click Start to begin.
Download Configuration/Log Files
To download a switch configuration file from the browser, highlight Configuration
File on the Download Configuration/Log Files menu and press Enter. To download a
switch log file from the browser, highlight Log File on the Download
Configuration/Log Files menu and press Enter.
The Download Configuration/Log Files window contains the following information:
Saving changes
The Save Changes window contains the following information:
To save all the changes that you made to the switch flash memory in the current
session, click the Save Configuration button.
When the switch configuration settings have been saved to NVRAM, they become
the default settings for the switch. These settings will be used every time that the
switch module is restarted.
72 IBM BladeCenter 4-Port Gb Ethernet Switch Module: Installation and User’s Guide
To Next Page
Loading...
