Ex. Coll.
Excessive Collisions. The number of frames for which transmission failed
due to excessive collisions.
Single Coll.
Single Collision Frames. The number of successfully transmitted frames for
which transmission is inhibited by more than one collision.
Coll. An estimate of the total number of collisions on this network segment.
Port Packet Analysis
The Port Packet Analysis window contains the following information:
The information on this window is described as follows:
Frames
The number of packets (or frames) received or transmitted by the switch
with the size, in octets, given by the column on the right.
Frames/sec
The number of packets (or frames) transmitted or received, per second, by
the switch.
Unicast RX
Displays the number of unicast packets received by the switch in total
number (Frames) and the rate (Frames/sec).
Multicast RX
Displays the number of multicast packets received by the switch in total
number (Frames) and the rate (Frames/sec).
Broadcast RX
Displays the number of broadcast packets received by the switch in total
number (Frames) and the rate (Frames/sec).
RX Bytes
Displays the number of bytes (octets) received by the switch in total number
(Total), and rate (Total/sec).
RX Frames
Displays the number of packets (frames) received by the switch in total
number (Total), and rate (Total/sec).
64 IBM BladeCenter 4-Port Gb Ethernet Switch Module: Installation and User’s Guide
To Next Page
Loading...
