IBM IC25N040ATCS04 - Travelstar 40 GB Hard Drive - Figure 90. Identify Device Information. (Part 5 of 7)

Current Master Password Revision CodesXXXXH92
Reserved40FEH91
Time required for Enhance security erase completion
0000 : Not supported
0000H90
Time required for security erase unit completion
Time= value (XXXXh)*2 [minutes]
XXXXH89
Ultra DMA Transfer mode (mode 5 supported)
15-14(=0) Reserved
13(=X) 1=UltraDMA mode 5 is selected
12(=X) 1=UltraDMA mode 4 is selected
11(=X) 1=UltraDMA mode 3 is selected
10(=X) 1=UltraDMA mode 2 is selected
9(=X) 1=UltraDMA mode 1 is selected
8(=X) 1=UltraDMA mode 0 is selected
7- 6(=0) Reserved
**5(=1) 1=UltraDMA mode 5 is selected
**4(=1) 1=UltraDMA mode 4 is supported
**3(=1) 1=UltraDMA mode 3 is supported
**2(=1) 1=UltraDMA mode 2 is supported
**1(=1) 1=UltraDMA mode 1 is supported
0(=1) 1=UltraDMA mode 0 is supported
XX3FH88
Command set/feature enabled
15(=0) Always
14(=1) Always
13- 2(=0) Reserved
1(=1) 1=SMART self-test supported
0(=1) 1=SMART error logging supported
4003H87
Command set/feature enabled
15-12(=0) Reserved
11(=1) 1=Device Configuration Overlay supported
10- 9(=0) Reserved
8(=X) 1=SET MAX security extension enabled
7(=X) 1=Address Offset mode enabled
6(=0) 1=SET FEATURES subcommand required to spin-up
5(=0) 1=Power-Up In Standby feature set has been
enabled via the SET FEATURES command
4(=0) 1=Removable Media Status Notification Feature
Set enabled
3(=X) 1=Advanced Power management Feature Set
enabled
2(=0) 1=CFA Feature Set supported
1(=0) 1=READ/WRITE DMA QUEUED command supported
0(=0) 1=DOWNLOAD MICROCODE command supported
*
*
*
0XXXH86
DescriptionContentWord
** indicates a feature that is able to be unsupported by the Device
Configuration Overlay command.
Figure 90. Identify device information. (Part 5 of 7)
Travelstar 60GH & 40GN hard disk drive specifications
127