R This indicates the retry bit, but this bit is ignored.
Input parameters from the device
Sector Count This indicates the number of requested sectors not transferred. The Sector Count
will be zero unless an unrecoverable error occurs.
Sector NumberThis indicates the sector number of the last transferred sector. (L = 0)
In LBA mode this register contains the current LBA bits 0–7. (L = 1)
Cylinder High/Low This indicates the cylinder number of the last transferred sector. (L = 0)
In LBA mode this register contains the current LBA bits 8–15 (Low) and bits
16–23 (High). (L = 1)
H This indicates the head number of the last transferred sector. (L = 0)
In LBA mode this register contains the current LBA bits 24–27. (L = 1)
Travelstar 60GH & 40GN hard disk drive specifications
186
To Next Page
Loading...
