Chapter 2. Setting up your computer
This chapter provides information about selecting and arranging a work space,
setting up your computer, and preparing it to run your applications.
Before you begin
Read the “Safety Information” on page vii before setting up your computer.
You will need the following:
v Computer
v Computer power cord
v Keyboard
v Mouse
v Monitor (sold separately with signal cable and power cord)
If you are missing an item, contact your place of purchase.
Selecting a location for your computer
Make sure you have an adequate number of properly grounded electrical outlets
for the computer, monitor, and any other devices. Select a location for the
computer where it will remain dry. Leave about 50 mm (2 in.) of space around the
computer for proper air circulation.
The following sections describe arranging your computer for comfort and
ease-of-use.
Arranging your work space
Arrange both the equipment and your work area to suit you. Light sources, air
circulation, and the location of electrical outlets can affect how you arrange your
work space.
Comfort
The following guidelines will help you decide what working position suits you
best.
Choose a chair to reduce fatigue from sitting in the same position for long periods.
The backrest and seat should adjust independently and provide good support. The
seat should have a curved front to relieve pressure on the thighs. Adjust the seat
so that your thighs are parallel to the floor and your feet are either flat on the
floor, or on a footrest.
When using the keyboard, keep your forearms parallel to the floor and your wrists
in a neutral, comfortable position. Try to keep a light touch on the keyboard, and
your hands and fingers relaxed. Change the angle of the keyboard for maximum
© Copyright IBM Corp. 2000 7
To Next Page
Loading...
Need help?
General
