- The transfer rate for Fast SCSI devices is 20.0.
– Advanced Configuration Options
Use this selection to view or change the settings such as enabling support for
large hard disk drives and support for drives with Ultra SCSI speeds.
v SCSI Disk Utilities
Select this choice to view the SCSI IDs that are assigned to each device or to
format a SCSI device.
To use the utility program, select a drive from the list. Read the on-screen
instructions carefully before making a selection.
Note: If you press Ctrl+A before the selected drives are ready, an Unexpected
SCSI Command Failure screen might appear. Restart the computer and
watch the SCSISelect messages as each drive starts. After the drive that
you want to view or format starts, press Ctrl+A.
Chapter 4. Configuring your computer 25
To Next Page
Loading...
Need help?
General
