Table 19. C2001000 to C20082FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, “Parts listing, Type 8406,” on page 229 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
C20023FF End acquiring VIO slot locks
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C2002400 Begin powering on slots
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C2002450 Waiting for power on of slots to
complete
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C20024FF End powering on slots
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C2002500 Begin power on VIO slots
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C20025FF End powering on VIO slots
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C2003100 Validating ISL command parameters
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C2003111 Waiting for bus object to become
operational
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
96 Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)