IBM Power PS700 Problem Determination And Service Guide

Table 15. B700xxxx Licensed internal code SRCs (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, “Parts listing, Type 8406,” on page 229 to determine which components are CRUs and which
components are FRUs.
B700 xxxx Error Codes Description Action
0103 System firmware detected a failure
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to “Isolating firmware problems” on
page 218.
0104 System firmware failure. Machine check,
undefined error occurred.
1. Check for server firmware updates.
2. Update the firmware.
0105 System firmware detected an error.
More than one request to terminate the
system was issued.
Go to “Isolating firmware problems” on page
218.
0106 System firmware failure.
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to “Isolating firmware problems” on
page 218.
0107 System firmware failure. The system
detected an unrecoverable machine
check condition.
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to “Isolating firmware problems” on
page 218.
0200 System firmware has experienced a low
storage condition
No immediate action is necessary.
Continue running the system normally. At the
earliest convenient time or service window,
work with IBM Support to collect a platform
dump and restart the system; then, go to
“Isolating firmware problems” on page 218.
0201 System firmware detected an error. No immediate action is necessary.
Continue running the system normally. At the
earliest convenient time or service window,
work with IBM Support to collect a platform
dump and restart the system; then, go to
“Isolating firmware problems” on page 218.
0202 Informational system log entry only. No corrective action is required.
0302 System firmware failure
1. Collect the platform dump information.
2. Go to “Isolating firmware problems” on
page 218.
0441 Service processor failure. The platform
encountered an error early in the
startup or termination process.
Replace the system-board and chassis
assembly, as described in “Replacing the FRU
system-board and chassis assembly” on page
260.
0443 Service processor failure. Replace the system-board and chassis
assembly, as described in “Replacing the FRU
system-board and chassis assembly” on page
260.
40 Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)

IBM Power PS700 Specifications

General

Brand	IBM
Model	Power PS700
Category	Server
Language	English