Adapter
Removal
1. If you have not already done so, remove the covers as described in “Cover” on
page 8-3.
2. Note the location of the adapter you are removing.
3. Remove the expansion-slot screw for the adapter; then grasp the adapter and
pull it free from the socket.
Adapter
Riser
4. If you are not replacing the adapter in this slot, install an expansion-slot cover
into the empty expansion slot.
Expansion-Slot
Cover
Screw
Screw
Replacement
Replace in reverse order.
Chapter 8. Removal and Replacement Procedures 8-19
To Next Page
Loading...
