Battery
CAUTION:
A lithium battery can cause fire, explosion, or a severe burn. Do not recharge,
disassemble, heat above 100°C (212°F), solder directly to the cell, incinerate, or
expose cell contents to water. Keep away from children. Replace only with the
part number specified for your system. Use of another battery may present a
risk of fire or explosion.
The battery connector is polarized; do not attempt to reverse the polarity.
Dispose of the battery according to local regulations.
Removal
1. If you have not already done so, remove the covers as described in “Cover” on
page 8-3.
2. For the Model 140 and Model 150:
a. Remove the disk drive bracket assembly from the system unit and carefully
place it on top of the power supply.
8-42 7043 43P Series Service Guide
To Next Page
Loading...
