Password
When you select this icon, the following screen is displayed.
Power-On Password
Setting a power-on password helps protect information stored in your system unit. If
a power-on password is set for your system unit, the Power-On status icon is shown
in the locked position; if a power-on password is not set, then the Power-On status
icon is shown in the unlocked position (as in the screen above).
When you select the Entry icon, a screen with 8 empty boxes appears. Type your
password in these boxes. You can use any combination of up to eight characters
(A–Z, a–z, and 0–9) for your password. As you type a character, a key appears in
the box.
Chapter 7. System Management Services 7-13
To Next Page
Loading...
