IBM System x3200

Connecting the cables
Attention: To prevent damage to equipment, connect the power cords last.
If the server cables and connector panel have color-coded connectors, match the
color of each cable end with the color of the connector. For example, match a blue
cable end to a blue connector on the panel, a red cable end with a red connector,
and so on.
The following illustration shows the input/output (I/O) connectors on the rear of the
server.
Mouse
Keyboard
Serial 1
Parallel
Video
USB (2)
USB (2)
Ethernet
Remote Supervisor
Adapter II SlimLine
Ethernet
Serial 2
Fixed power supply
Hot-swap power supplies
AC power LED
DC power LED
Power cord
AC power LED
DC power LED
Chapter 2. Installing optional devices 35