EasyManuals Logo
Home>IBM>Server>System x3200

IBM System x3200 Installation Guide

IBM System x3200
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
Other beep codes
See the Problem Determination and Service Guide on the IBM System x
Documentation CD for information about other beep codes.
POST error codes
The following table provides an abbreviated list of the error codes that might appear
during POST. See the Problem Determination and Service Guide on the IBM
System x Documentation CD for more information about the POST error codes. To
check for updated technical information, go to http://www.ibm.com/servers/eserver/
support/xseries/index.html/, select System x3200, and click Go; then, click the
Install and use tab and click Product documentation.
Table 4. Abbreviated list of POST error codes
v Follow the suggested actions in the order in which they are listed in the Action
column until the problem is solved.
v See the parts listing in the Problem Determination and Service Guide to determine
which components are customer replaceable units (CRU) and which components
are field replaceable units (FRU).
v If an action step is preceded by ā€œ(Trained service technician only),ā€ that step must
be performed only by a trained service technician.
Error code Description Action
062 Three consecutive boot failures
using the default configuration.
1. Flash the system firmware to
the latest level (see the
Problem Determination and
Service Guide on the IBM
System x Documentation CD).
2. (Trained service technician
only) Replace the system
board.
101 Tick timer internal interrupt failure. (Trained service technician only)
Replace the system board.
102 Internal timer channel 2 test
failure.
(Trained service technician only)
Replace the system board.
151 Real-time clock error.
1. Reseat the battery.
2. Replace the following
components one at a time, in
the order shown, restarting the
server each time:
a. Battery
b. (Trained service technician
only) System board
161 Real-time clock battery failure.
1. Reseat the battery.
2. Replace the following
components one at a time, in
the order shown, restarting the
server each time:
a. Battery
b. (Trained service technician
only) System board
48 System x3200 Type 4362 and 4363: Installation Guide

Table of Contents

Other manuals for IBM System x3200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM System x3200 and is the answer not in the manual?

IBM System x3200 Specifications

General IconGeneral
BrandIBM
ModelSystem x3200
CategoryServer
LanguageEnglish

Related product manuals