Ice Torus 126 User Manual

Torus 126, 380 and 500 Operator Manual
Rev AB Start the Printer 4-5
Start the Printer
Touch the Start-Up/Shutdown icon to start the printer.
The events that occur after you touch the Start-Up/Shutdown icon are as
follows:
•The Offline status appears in the status window of the CLARiTY™
Home Page (refer to
Figure 4-4).
•The Stop and Run buttons become active (Figure 4-4).
• If a fault or a warning condition exists, a fault or warning message
appears in the status window instead of the Offline status. You must
clear the fault or warning message before you continue the process of
printing.
Refer to “Warnings and Fault Messages” on page 5-14 for more
information on Fault and Warning messages.
Figure 4-4: Home Page - Offline
Startup/Shutdown
Offline Status

Ice Torus 126 Specifications

General

Brand	Ice
Model	Torus 126
Category	Printer
Language	English