Ice Torus 126 User Manual

Torus 126, 380 and 500 Operator Manual
Rev AB Add Ink 4-7
A description of the colors that appear in the status bar is as follows:
Insert a New Ink Canister
The ink must be added when the ink low level warning appears on the
CLARiTY™ screen. The ink status bar must show less than 5% (Figure 4-
6). The ink status shown on the status bar makes sure that the present ink
canister is replaced after the present canister becomes empty.
When the consumables meter status is red before a new canister is fitted,
the printer will go through a longer filling cycle before the printing
continues.
Color Description
Blue The reservoir is full and replacement ink canister is not required
Yellow Enough ink is available for printing but you can add a new ink
canister. If a new ink canister is not added, the printer operates
until the printhead ink reservoir reaches a critically low level.
Red The ink canister is empty. A new ink canister must be added
and the ink empty fault must be cleared.
Table 4-3: Colors in the Consumables Status Area
Figure 4-6: Consumables Area
Consumables Area
Ink Status

Ice Torus 126 Specifications

General

Brand	Ice
Model	Torus 126
Category	Printer
Language	English