Ice Torus 126 - Page 37

Torus 126, 380 and 500 Operator Manual
Rev AB Add Ink 4-11
5 Remove the protective cover from the new ink canister.
6 Align the new canister into the canister chute and turn to your right
(
Figure 4-12).
7 Insert and set the new canister inside the chute carefully. Do not
overtighten.
Note: When you must refit a half full ink canister, the ink canister code must
be entered again.
Figure 4-11: Removal of Empty Ink Canister
Canister Chute
Figure 4-12: Direction of Insertion