Icom IC-41S - Priority Channel Setting

13
3
BASIC OPERATION
3
■ Priority channel setting
The priority channel, simply recalled by pushing (PRIO),
and also is automatically monitored during the priority scan.
You can set the only one channel as the priority channel.
“P” appears when the priority channel is set.
DThe priority channel selection
➥ Push (PRIO) to select the priority channel.
• “N/A” appears when the priority channel is not set.
DSet the priority channel
q Select the desired channel. (p. 11)
w Push and hold
(PRIO Set) for 2 sec. to set the dis-
played channel as the priority channel.
DCancel the priority channel setting
➥ Push [Top] (Function) to enter the function mode, then push
and hold
(PRIO Clear) for 2 sec. to cancel the priority
channel setting.
• “P” disappears.
The priority channel
is cancelled.
The selected channel is set
to the priority channel.
The priority channel
is selected.
When the priority
channel is not set.