Icom IC-41S - Scan Operation; Scan Type Overview

17
5
SCAN OPERATION
4
5
■ Scan types
The transceiver has 4 scan types, tag function and 4 resume
conditions providing scanning versatility.
Tag channels are independently set for open, group and pri-
ority scans. Initially, all channels may be set as tag channels
for all scans.
CB-R2
CB-R2CB-R1
Scan cancel
CB-R8
CB-R1
CB-R3CB-R4
CB-R8
REPEATER SEARCH SCAN
Scans all repeater channels (‘CB-R1’ to ‘CB-R8’)* in se-
quence. If there are no busy channels after scanning
channels ‘CB-R1’ to ‘CB-R8,’* it begins scanning from
‘CB-R1’ again, then the transceiver transmits a signal to
search for a repeater while the scanning.
* Excludes Emergency Repeater ‘CB-R5.’
Repeatedly watches a designated priority channel
after scanning 5 tagged channels.
Priority
channel
GROUP OR PRIORITY SCAN
ch 1
ch 2 ch 3 ch 4
ch 5
ch 10
ch 9 ch 8 ch 7
ch 6
Repeatedly scans all tag channels in sequence.
ch 40
ch 1 ch 2 ch 3
ch 4
ch 5
ch 6ch 39
OPEN SCAN