Icom IC-41S - Specifications

47
14
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DD
General
• Frequency coverage
TX : 450–480 MHz
(includes all 40 CB channels)
RX : 450–520 MHz
• Mode : 16K0F3E (FM)
• Channel spacing
CB channel : 25 kHz
Private channel : 12.5/25 kHz
• Current drain (at 7.2 V) : TX (at 5 W) 1.9 A
Max. audio 300 mA max.
• Power supply requirement : 7.2 V DC nominal*
(negative ground)
*Specified Icom’s battery pack only
• Frequency stability : ±2.5 ppm
(–30°C to + 60°C)
• Antenna impedance : 50 Ω nominal
• Dimensions : 53.0(W) ×120.0(H) ×32.5(D) mm
(Projections not included)
• Weight : Approx. 320 g (including BP-232N)
DD
Transmitter
• Output power : 5 W
• Modulation system : Variable reactance frequency
modulation
• Max. frequency deviation : ±5.0 kHz
• Spurious emissions : 70 dB min
• Adjacent channel power : 75 dB (typical)
• External mic. connector : 3-conductor 2.5 (d) mm/2.2 kΩ
DD
Receiver
• Receive system : Double conversion
superheterodyne
• Sensitivity (12 dB SINAD) : –12 dBµ (typical)
• Squelch sensitivity : –12 dBµ (typical; Threshold)
• Intermodulation rejection ratio : 74 dB (typical)
• Spurious response rejection ratio : 70 dB min
• Adjacent channel selectivity : 75 dB (typical)
• Audio output power : 0.5 W (typical) at 5% distortion
with an 8 Ω load
• External speaker connector : 2-conductor 3.5 (d) mm/8 Ω
All stated specifications are subject to change without
notice or obligation.