24
6
TONE SQUELCH OPERATION
■ Pocket beep operation
This function uses CTCSS (subaudible) tones and DTCS
code for calling and can be used as a “common pager” to
inform you that someone has called while you were away
from the transceiver.
D Waiting for a call from a specific station
q Select the desired channel except for channels 5 and 35.
(p. 11)
w Set the desired CTCSS tone/DTCS code in set mode.
(pgs. 22, 35)
e Push and hold [Side1]
(TSQL) for 2 sec. several times until
“T SQL ë” appears to activate the pocket beep.
r When the received signal includes a matching tone or
code, the transceiver emits beep tones every 10 sec. and
“ ë” blinks.
t Push [PTT] to answer and to stop blinking.
• Tone squelch is automatically selected.
To Next Page
Loading...
