20
5
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
6
OTHER FUNCTIONS
■ Home function
The Home function is convenient if you want to return the
transceiver to default settings without changing memory
channels.
The following transceiver’s settings will return to the default
value.
• Operating mode
(Frequency or memory mode with frequency or
channel number, including bank*)
• ANL setting • Key touch beep • Squelch level
• Side tone level • Microphone gain
• Internal microphone usage • Time-Out timer setting
The default settings can be modified to suits your preference
using with the optional cloning software, CS-A14.
➥ Hold down [CLR] for 2 seconds
to return the transceiver into the
default setting.
■ Accessing the 121.5 MHz
emergency frequency
(Selectable in only the IC-A15)
The IC-A15 can quickly be set to the 121.5 MHz emergency
frequency. This function can be activated even when the key
lock function is in use.
q Push [FUNC], then [121.5](0) to call on the emergency
frequency.
w Push [CLR] to return to the frequency mode.
[CLR
Emergency initial, “E,” ap-
pears with the frequency
[FUNC]
[121.5](0)
*For only the IC-A15
To Next Page
Loading...
Need help?
General
