EasyManua.ls Logo

Icom IC-E90 - Test Equipment Connection Guide

Icom IC-E90
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
3
BATTERY CHARGING
Regular charging
Prior to using the transceiver for the first time, the battery
pack must be fully charged for optimum life and operation.
CAUTION: To avoid damage to the transceiver, turn the
transceiver OFF while charging.
Recommended temperature range for charging:
0°C to +35°C; +32°F to +95°F
Use the wall charger* (BC-110AR/DR) only. NEVER use an-
other manufactures’ charger.
* Not supplied with some versions.
An optional cable CP-19R (for 12 V cigarette lighter socket)
can be used instead of the AC adapters of the above charg-
ers.
DBattery indicators
The battery indicators blink while charging but do not indicate
the power condition.
“CHG_F” appears when the charging is completed. Discon-
nect the wall charger in this case.
q Attach the battery pack to the transceiver.
w Be sure to turn the transceiver power OFF.
e Connect the AC adapter* (BC-110D/DR) as shown below.
* Not supplied with some versions.
r Remove any cables from the [DC11V] jack.
Charging period: 15 hours (w/BP-217)
ee
BATTERY CHARGING
IC-E90 with BP-217
BC-110D/DR
to AC outlet
to DC power
jack
to a 12 V
cigarette lighter
socket
CP-19R
(optional)

Table of Contents

Other manuals for Icom IC-E90

Related product manuals