■ [VOL] function assignment
[VOL] can be used as a channel selector instead of [] and
[], to suit your preference. However, when [VOL] functions as
a channel selector, [] and [] function as volume controls.
q While holding down [] and [], turn ON the power to
enter the Initial Set mode.
w Push [] or [] to select the dial assignment item. (tOP)
e Rotate [VOL] to select an option.
r Push [# ENT](MN.W) to exit the Initial Set mode.
[VOL] and
[]/[] function as described below, depend-
ing on the option.
[VOL]
[VOL] functions as the volume control.
[VOL] functions as the channel selector.
4
BASIC OPERATION
Option [VOL] []/[]
tOP.VO Volume control Channel selector
tOP.di Channel selector Volume control
To Next Page
Loading...
