Icom IC-G80 - Squelch Delay

36
9
SET MODES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Squelch delay
Sets the squelch delay between short and long. The delay
prevents the squelch from repeatedly opening and closing
while continuously receiving a weak signal.
• Sqd. S : Sets the squelch delay to short.
• Sqd. L : Sets the squelch delay to long .
D DTMF speed
Selects a DTMF transfer speed.
• dtd. 1 : 100 milliseconds interval; 5.0 cps
• dtd. 2 : 200 milliseconds interval; 2.5 cps
• dtd. 3 : 300 milliseconds interval; 1.6 cps
• dtd. 5 : 500 milliseconds interval; 1.0 cps
(cps=characters per second)
D [VOL] function assignment
Selects whether or not to use [VOL] as the channel selector
instead of [] and []. When [VOL] functions as the channel
selector, [] and [] function as volume controls.
D Simple mode
Inhibits the access to some functions. The operations and
modifications of Set mode items listed below are inhibited
while the Simple Mode function is turned ON.
Operation Set mode modification
Tone Squelch and Pocket Beep Repeater tone frequency
Tone Scan Tone squelch frequency
Setting skip channels DTCS code
Priority Watch DTCS polarity
Programming a channel name Operating mode
Talk Around function
Option [VOL] []/[]
tOP.VO Volume control Channel selector
tOP.dI Channel selector Volume control