Icom IC-M220 - Parts List; Main Unit Parts

5
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
PANEL DESCRIPTION
2
D Software key functions
Key Function Reference
DISTRESS
Distress
Push to display the “Distress” screen to select the nature
ofdistress,thenpushthe[DISTRESS](redkey)tomake
a call.
L
DTRS
is displayed in the Multiple-task mode. (For only
the USA version)
NEVER MAKE A DISTRESS CALL IF YOUR SHIP
OR A PERSON IS NOT IN AN EMERGENCY. A
DISTRESS CALL SHOULD BE MADE ONLY WHEN
IMMEDIATE HELP IS NEEDED.
p. 18
OTHER DSC
Other DSC
Push to compose an Individual call, Group call, All Ships
call or a Test call.
L
OTH
is displayed in the Multiple-task mode. (For only
the USA version)
p. 20
TASK
Task
(For only the USA version)
Displayed only in the Multiple-task mode.
Push to display the task list.
p. 34
SCAN
Scan
Push to start or stop a Normal or Priority scan.
p. 13
DW
/
TW
Dualwatch / Tri-watch
Push to start or stop Dualwatch or Tri-watch.
p. 14
HI/LO
High/Low
Push to set the output power to high or low.
Some channels are set to only low power.
p. 19
CH/WX
Channel/
Weather channel
Push to select regular channels or Weather channels.
L The Weather channel is for only the USA version.
CHAN
is displayed for other versions.
L While the Call channel or Channel 16 is displayed, push
this key to return to the regular channel mode.
p. 8
LO/DX
Low/DX
(For only the USA version)
Push to turn the Attenuator ON or OFF.
—
AQUA
AquaQuake
Hold down to turn ON the AquaQuake function to clear
water from the speaker grill.
p. 11

Favorite channel
Push to set or release the displayed channel as a
Favorite channel.
p. 13
NAME
Channel Name
Push to edit the name of the displayed channel.
p. 11
BKLT
Backlight
Push to display the backlight brightness adjustment
screen.
L Whileintheadjustmentmode,push[▲]/[▼][◄]/[►]to
adjust the brightness of the display and keys’ backlight to
between 1 and 7, or OFF.
p. 9
LOG
LOG
Push to display the received call log or distress message
log.
p. 33