Icom IC-M220

15
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
7
DIGITAL SELECTIVE CALLING (DSC)
■ DSC address ID
D Entering an Individual or Group ID
You can enter a total of 60 Individual IDs and 30 Group IDs, and assign names to them of
up to 10 characters.
1. Open the “INDIVIDUAL ID” or “Group ID” screen.
[MENU] > DSC Settings > Individual ID
[MENU] > DSC Settings > Group ID
• “No ID” is displayed if no ID is entered.
2. Push
ADD
.
• The ID entry screen is displayed.
3. Enter an Individual or Group ID.
TIP:
• Select a number using [◄]/[►].
• Push [ENT] to set the selected number.
• Select “←” or “→” on the screen to move the cursor.
NOTE:
• For a Group ID, the rst digit is xed as “0.”
• For any coast station ID, the rst two digits are
xed as “0.”
4. Push
FIN
.
• The name entry screen is displayed.
5. Enter the ID’ s name.
TIP:
• Push
123
to use numbers, and push
!$?
to
use characters and letters.
• Select characters or space using [▲]/[▼]/[◄]/[►].
• Select “◄” or “►” on the screen to scroll.
• Push [ENT] to enter the selected character.
• Select “←” or “→” on the screen to move the
cursor.
6. After entering, push
FIN
to save, and return to the
previous screen.
• The entered name is displayed.