Icom IC-M220 - Mic-Jack Unit Top Board Layout; GPS-ANT Unit Top Board Layout

16
7
DIGITAL SELECTIVE CALLING (DSC)
D Deleting an entered ID
(Example: Deleting an Individual ID: STATION 2)
1. Open the “INDIVIDUAL ID” screen.
[MENU] > DSC Settings > Individual ID
2. Select “STATION 2,” and then push
DEL
.
• “Are You Sure?” is displayed.
3. Push
OK
to delete.
L Push
CANCEL
to cancel the deletion.
• The selected ID is deleted, and then returns to the
previous screen.
TIP: You can edit an ID and its name by pushing
EDIT
in step 2.
■ Entering the position and time
A Distress call should include the vessel’s position, date, and time. If no GPS data is
received, manually enter the position and Universal Time Coordinated (UTC) time.
NOTE:
• The manual entry is disabled while valid GPS data is received.
• The manually entered position and time is valid only for 23.5 hours, or until turning
OFF the transceiver.
1. Open the “POSITION INPUT” screen.
[MENU] > DSC Settings > Position Input
2. Enter the latitude.
TIP:
• Select a number or a compass direction using [▲]/
[▼]/[◄]/[►].
• Select “←” or “→” on the screen to move the
cursor.
• Push [ENT] or
FIN
to save the selected number.
3. Enter the longitude and the UTC time.
L See the TIP in step 2 to enter.
4. Push
FIN
to set the entered position and time.
5. Push
EXIT
to return to the standby screen.
• The “DSC Settings” screen is displayed.