Icom IC-M220

38
8
MENU SCREEN
■ Using the Menu screen
The Menu screen is used to set items, select options, and so on for the transceiver’s
functions.
D Menu screen operation
Example: Setting the key beep to “Off.”
1. Push [MENU].
• The Menu screen is displayed.
2. Push [▲] or [▼] to select “Configuration,” and then
push [ENT].
• The “CONFIGURATION” screen is displayed.
L Holding down [▲] or [▼] sequentially scrolls up or
down through the Menu screen.
3. Push [▲] or [▼] to select “Key Beep,” and then push
[ENT].
• The “KEY BEEP” screen is displayed.
4. Push [▲] or [▼] to select “Off,” and then push [ENT].
• “Off” is set and the transceiver returns to the previous
screen.
TIP:
• To exit the Menu screen, push
EXIT
or [MENU].
• To return to the previous screen, push
BACK
or [CLR].