Icom IC-M220

43
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
9
CONNECTIONS AND MAINTENANCE
■ Supplied accessories
■ Connecting the microphone
1. Insert the microphone’s screw connector to the microphone jack on the front panel.
2. Rotate the screw connector clockwise until it is completely tightened.
CAUTION: Be sure that the microphone connector is screwed completely, otherwise
the transceiver may lose its waterproof protection.
Microphone’s
screw connector
Mounting bracket
For mounting bracket
Flat washers (M5)
Spring washers (M5)
DC power cableMicrophone hanger
and screws
(3 × 16 mm)
Screws
(5 × 20 mm)
Knob bolts
Microphone