Icom IC-M220 - DSC Log

33
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
■ DSC Log
D Received DSC Log
The transceiver saves up to 30 received Distress call messages and 50 received “Others”
call messages in your DSC Log.
On the operating screen, “
” is displayed when there is an unread call message.
The icon blinks when there is a new received call message.
1. Open the “DSC Log” screen.
[MENU] > DSC Log
2. Select “Received Call Log,” and then push [ENT].
• The “RCVD CALL LOG” screen is displayed.
3. Select “Distress” or “Others,” and then push [ENT].
L “Distress” displays the received Distress call log, and
“Others” displays the received DSC call log.
TIP: You can also display the “Received” screen by
pushing
LOG
on the operating screen.
4. Select a log, and then push [ENT] to display the
detailed information.
EXIT
: Returns to the operating screen.
BACK
: Returns to the previous screen.
DEL
: Deletes the selected call log.
MMSI
: Saves the MMSI as an Individual ID.
D Transmitted DSC Log
The transceiver saves up to 30 DSC transmitted calls in
your DSC Log.
1. Open the “DSC Log” screen.
[MENU] > DSC Log
2. Select “Transmitted Call Log,” and then push [ENT].
• The “TX CALL LOG” screen is displayed.
3. Select a log, and then push [ENT] to display the
detailed information.
EXIT
: Returns to the operating screen.
BACK
: Returns to the previous screen.
DEL
: Deletes the selected call log.
MMSI
: Saves the MMSI as an Individual ID or a
Group ID.