Icom IC-M220 - Page 42

32
7
DIGITAL SELECTIVE CALLING (DSC)
D Receiving a Test call
When a Test call is received:
• An alarm sounds.
• “RCVD TEST CALL” is displayed.
1. Push
ALARM OFF
to turn OFF the alarm.
2. Push the Software Key below your next operation.
IGN
:
(Ignore)
Ignores the call and returns to the operating
screen.
• The call is saved in the DSC Log.
• “
” blinks continuously until you display
the call message.
ABLE
:
( Able to
comply)
Sends a Test Acknowledgement “Able to
Comply.”
• The call is saved in the DSC Log.
ACPT
:
(Accept)
Accepts the call.
• Displays the received call’s information.
• The call is saved in the DSC Log.
• The received call’s information is
displayed.
Push
ACK
, and then push
CALL
to send a
Test Acknowledgement. (p. 25)
Push
RESEND
to resend.