Icom IC-M220 - Page 33

23
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
D Sending a Group call
A Group call enables you to send a DSC call to only a specic group.
L You can send a Group call to a pre-entered group address, or manually enter the address
before sending. (p. 15)
1. Push
OTHER DSC
.
• The “OTHER DSC” screen is displayed.
L You can also display the “OTHER DSC” screen by
selecting the “Other DSC” item on the Menu screen.
2. Select “Type,” and then push [ENT].
• The “MESSAGE TYPE” screen is displayed.
3. Select “Group,” and then push [ENT].
• The Group call is selected, and returns to the “OTHER
DSC” screen.
4. Select “Address,” and then push [ENT].
• The “ADDRESS” screen is displayed.
5. Select the group to send a Group call, and then push
[ENT].
L You can also select “Manual Input” to manually enter
the target group.
6. Select “Channel,” and then push [ENT].
7. Select the channel to assign, and then push [ENT].
L The assigned channels are preset by default.
8. Push
CALL
to send the Group call.
• “Transmitting Group Call” is displayed, and then the
assigned channel is automatically selected.
L If Channel 70 is busy, the transceiver stands by until
the channel becomes clear.
9. Hold down [PTT] to communicate.