27
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
D Sending a Position Reply call
Send a Position Reply call when a Position Request call is received.
If the Auto ACK function is set to “Auto,” the Acknowledgement is automatically sent to the
calling station. (p. 36)
1. While a Position Request call is being received, push
to turn OFF the alarm.
2. Push
.
• The received call’s information is displayed.
3. Push
to send an “Able to Comply”
Acknowledgement, or push
to send an “Unable
to Comply” Acknowledgement.
L If no valid GPS position is received, you can manually
enter the position and time in “Position” item on this
screen. See “Entering the position and time” on page
16 for details.
4. Push
to send the Position Reply call.
5. Push
, and then
to return to the operating
screen.
To Next Page
Loading...
