Icom IC-M220 - Page 40

30
7
DIGITAL SELECTIVE CALLING (DSC)
D Receiving a Group call or All Ships call
When a Group call is received:
• An alarm sounds.
• “RCVD GROUP CALL” is displayed.
When an All Ships call is received:
• An alarm sounds.
• “RCVD ALL SHIPS” is displayed.
1. Push
ALARM OFF
to turn OFF the alarm.
• The channel that is assigned by the caller is
automatically selected after 10 seconds by default.
2. Push the Software Key below your next operation.
IGN
:
(Ignore)
Ignores the call and returns to the operating
screen.
• The call is saved in the DSC Log.
• “
” blinks continuously until you display
the call message.
PAUSE
:
(Pause)
Pauses the countdown until the assigned
channel is automatically selected.
• Select
RESUME
to resume the countdown.
• The call is saved in the DSC Log.
L
PAUSE
is not displayed if the “CH Auto SW”
item is set to “Manual.” (p. 36)
ACPT
:
(Accept)
Accepts the call.
• The assigned channel is selected.
• The call is saved in the DSC Log.
STBY
: Closes the call, and then returns to
the operating screen.
INFO
: The received call’s information is
displayed.
( Example: when a Group
call is received)