A-2
APPENDIX
4. After sending the Individual DSC call, the transponder will display “DSC Transmission
COMPLETED.”
L Push [CLEAR] to return to the screen displayed before you entered the Voice channel
selection screen in step 2.
• The transceiver stands by on Channel 70 until an Acknowledgement is received.
5. When the Acknowledgement is received, an alarm sounds.
If ‘Able to comply’ is received, push
to turn OFF the alarm.
L If ‘Unable to comply’ is received, push
to turn OFF the alarm, then
“INDIVIDUAL CALL FAILED” is displayed.
6. Select the Intership channel specied in step 2.
L A different Intership channel will be selected if the station you called cannot use the
channel.
7. Push [PTT] and speak at your normal voice level.
8. After the communication is finished, push
to return to the normal operating
mode.
[▼]
[CLEAR]
[DSC]
[
▲]
TRANSPONDER
A7466-2EX
To Previous Page
Loading...
