Icom IC-R2500 - Copying Memory Contents

27
5
MEMORY OPERATION
[EXAMPLE]: Transferring the contents of memory channel 30 to VFO.
Push to select memory mode.
Rotate for selecting memory channel. Push for 3 sec.
S.MW
VFO/MR
S.MW
VFO/MR
This function transfers a memory channel’s contents to VFO
(or another memory channel). This is useful when searching
for signals near a memory channel frequency and for recalling
the subaudible tone frequency, etc.
D Memory➪VFO
qSelect the desired band’s (left or right) memory channel to
be transferred.
➥ Push the desired band’s [VFO/MR•S.MW] several times
to select memory mode
, then rotate the same band’s
[DIAL] to select the desired memory channel.
•“!” and memory channel number appear.
wPush and hold [VFO/MR•S.MW] for 3 sec. to transfer the
selected memory channel contents to VFO mode
.
• VFO mode is selected automatically.
■ Copying memory contents