Icom IC-R2500 - Page 39

32
5
MEMORY OPERATION
5
w Push [VFO/MR•S.MW] for 1 sec. to enter select memory
write mode.
•“!” indicator and the memory channel number blink.
e Push [SET•SKIP] once to select “bAnk.”
r Rotate the same band’s [DIAL] to select the desired bank
indicator to transfer or erase.
• Push [ATT•PRIO] to toggle the bank or bank channel selection.
• Select “– –” indication when erasing the contents from the bank.
•Vacant bank channel numbers are only be displayed.
t Push and hold [VFO/MR•S.MW] for 1 sec. to program the
bank and return to regular memory mode
.
y Repeat steps q to t for transferring or erasing an an-
other bank’s contents.
Bank selection Bank channel selection
After [SET•SKIP]
released
Memory channel blinks