Icom IC-R2500 - Page 51

44
9
DIGITAL MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
r Rotate the left band’s [DIAL] to select the desired call sign
or code.
• Push [MODE•SCAN] (or [MONI•T/T-SCAN]) to move the cursor.
t Push any key for the main band to exit set mode.
y Push and hold [MONI•T/T-SCAN] for 1 sec. to enter tone
squelch selection mode, then rotate left band’s [DIAL] until
“ S” or “S ” appears to turn the pocket beep func-
tion ON with digital call sign squelch or digital code
squelch for DV mode (digital NAC squelch or digital selec-
tive squelch for P25 mode), respectively.
• DV mode operation
Appears when the pocket
beep with digital call sign
squelch is turned ON.
Appears when the pocket
beep with digital code
squelch is turned ON.
• P25 mode operation
Appears when the pocket
beep with digital Selective
squelch is turned ON.
Appears when the pocket
beep with digital NAC
squelch is turned ON.
[MONI•T/T-SCAN]
[DIAL]
[DIAL]
[MODE•SCAN]
[MONI•T/T-SCAN]