Icom IC-R2500 - Page 68

61
10
SET MODE
DD
RX call sign indication
This item stores and indicates the newest received call sign.
The received call sign is cleared once the receiver is turned
OFF.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
• Push [MODE•SCAN] (or [MONI•T/T-SCAN]) to move the cursor.
DD
RX RPT1 call sign indication
This item stores and indicates the newest received RPT1 call
sign. The received call sign is cleared once the receiver is
turned OFF.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
• Push [MODE•SCAN] (or [MONI•T/T-SCAN]) to move the cursor.
DD
RX RPT2 call sign indication
This item stores and indicates the newest received RPT2 call
sign. The received call sign is cleared once the receiver is
turned OFF.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
• Push [MODE•SCAN] (or [MONI•T/T-SCAN]) to move the cursor.
DD
RX message indication
This item stores and indicates the newest received message.
The received message is cleared once the receiver is turned
OFF.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
• Push [MODE•SCAN] (or [MONI•T/T-SCAN]) to move the cursor.
Appears
(HELLO: Message example)
Appears
(CCCCCC: Call sign example)
(BBBBBB: Call sign example)
Appears
Appears
(AAAAAA: Call sign example)