13
4
BASIC OPERATION
✔ Convenient
Monitor function: Push and hold [ ] to listen to weak sig-
nals that do not open the squelch; or push [ ] twice to mon-
itor a signal without having to continuously hold [ ].
Squelch control: The transceiver employs a noise pulse
count system
and therefore, squelch is adjusted automatically
when “AUto” is selected for the squelch level:
Push [SQL], then push [
Y]/[Z] one or more times until “AUto”
appears. Manual levels from “Sql 1” to “Sql 8” are also avail-
able to suit personal preferences and operating conditions.
■ Selecting a memory channel
➀ Push [A V] to select memory chan-
nel mode, if necessary.
•“X” appears.
➁ Push 2 digit keys to select the de-
sired memory channel (or push the
[
Y]/[Z] keys).
• The first nine memory channels are
preceded by a “0.”
• When you want to select scan edge
channels PA or Pb, push [4], [1] or [4],
[2], respectively.
■ Lock function
The lock function prevents accidental frequency changes and
accidental function activation. By default, [
D L] toggles this
function on and off.
Push [
D L] for 1 sec. to toggle the function on and off.
•“é” appears while the lock func-
tion is activated.
• [PTT], [PWR/VOL] and [ ]can be
used regardless of this setting.
To Next Page
