30
10
OTHER FUNCTIONS
■ Resetting the CPU
Reset the CPU before operating the transceiver for the first
time, or when the internal CPU malfunctions.
➥ While pushing [A V] + [C T], turn
power on to reset the transceiver.
•“CLEAR” appears briefly to indicate
the CPU has been reset.
CAUTION: Resetting the CPU returns all programmed
contents to their default settings.
AT
POWER ON
D Scan resume condition (see p. 24)
D Active memory channels
This item allows you to adjust the
number of active memory channels.
Selectable values are 10, 20, 30 or
40.
IC-T2H Manual 01.12.5 4:31 PM Page 30 (1,1)
To Next Page
Loading...
