31
10
OTHER FUNCTIONS
■ Key customize mode
The functions of the [SQL], [SC], [DUP], [H/L], [A V], [B M], [C
T] and [D L] keys on the IC-T2H can be customized to suit
your operating needs.
➀ While pushing [#] + [0], turn power
on to enter key customize mode.
•“CUStom” appears.
➁ Push the key you wish to program.
• The key’s currently programmed func-
tion appears and scrolls across the
display.
➂ Push the [Y]/[Z] keys to select the
function you wish to assign to the
key.
• See the chart on the following page
for assignable functions.
➃ Push the same key as in step ➁ for 1 sec. to assign the
function to the key.
• If this step is not performed, the key will retain its previous func-
tion.
➄ Push another key to be programmed, if desired; or, turn
power off, then on again to exit key customize mode.
AT
POWER ON
■ Guide function
The guide function displays the functions of keys and
switches quickly and easily.
➀ Push [#] to activate the guide func-
tion.
•“GUIdE” appears in the display.
➁ Push and hold the key or switch
you want to know the function of.
• The key/switch name appears and its
assigned function scrolls across the
display.
➂ Release the key/switch pushed in the previous step to re-
turn to normal operation.
To Next Page
Loading...
