Icom ID-1

48
7
TRANSMIT AND RECEIVE— VOICE
New2001
7
DD
Automatic received call record indication
The automatic Received call record screen indication can be
deactivated, if desired.
qClick [CD] to display the Received call record screen.
wClick “Displays when new call sign signal is received” to
turn the automatic indication ON and OFF.
• ON (“✔”) : The record screen automatically appears when
a call is received. (default)
• OFF (no “✔”) : The record screen appears only when [CD] is
clicked.
DD
Saving the received call record
The displaying contents of the Received call record screen
with the operating frequency and mode, can be saved into the
PC.
➥ Click [SaveAs] to save the contents into the PC.
• Specify the desired file name and select saving location.
• The file is saved in “csv” format.
NOTE: The saved data can not be re-loaded with the ID-1
control application. Load the file with a spreadsheet soft-
ware for log management, etc.
Click to save.
✔ About status indication
A status is indicated in digital repeater operation as follow;
RPT UP : When receiving the signal that another station
accessing to the repeater.
UR? : When the target station does not reply the call.
RPT? : When the linking repeater is unable to found.
Click to remove “✔.”
ID-1_ENG_2.qxd 04.9.22 9:29 Page 48 (1,1)