Icom ID-50A


2
6
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
■ Charging the battery pack
D Capacity of the battery pack
ICON BATTERY STATUS
󰀩
The battery is exhausted a little.
The battery is nearing exhaustion.
The battery is almost fully exhausted.
To display the correct battery status:

([MENU] > SET > Function > Battery Pack Select)

following item to “ON.”
([MENU] > SET > Function > Battery Pack Conrmation)
NOTE:
• 
optimum life and operation.
• BE SURE to turn OFF the transceiver while charging. Otherwise, the attached battery pack
cannot be charged.
• While charging, the charging icon “
” and “Charging....” are displayed.
• The icon and “Charging....” disappear when the battery pack is fully charged.
• You may not be able to charge:
- Depending on your USB cable or power adapter.
- When using a USB hub or connecting to a low output USB port.
• 󰀨
• 
(default).
[MENU] > SET > Function > USB Power Input (Phone, Tablet, PC)
USB cable
To a
USB port

or external battery
(User supplied)
Turn OFF
L See the Advanced manual about the optional battery packs and chargers.