Icom ID-50A

RECORDING A QSO ONTO A microSD CARD
6
26
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
■ Recording a QSO audio
NOTE:
• Once a voice recording starts, the Recording function will be continuously turned ON until
you stop recording, even if you turn OFF the transceiver.
• FM Radio audio cannot be recorded.
1. Push [QUICK].
2. Select “<<REC Start>>.”
• “Recording started” is displayed.
L Information
• The function records the audio on the MAIN band while the Dualwatch function is ON.
• The function records the audio on the displayed band (A or B) while the Dualwatch
function is OFF.
•
is displayed while recording.
• is displayed while the recording is paused.
• Recording continues until you stop recording, or the card becomes full.
• If the recording le reaches 2GB, the transceiver automatically creates a new le and
continues recording.
3. Push [QUICK].
4. Select “<<REC Stop>>.”
• “Recording stopped” is briey displayed, and voice recording stops.
TIP: As the default setting
• The recording is paused while the squelch is closed, and resumes when a signal is
received. ([MENU] > RECORD > QSO Recorder > Recorder Set > RX REC Condition)
• The recording automatically starts when you start to transmit, even if the Recording function
is turned OFF. ([MENU] > RECORD > QSO Recorder > Recorder Set > PTT Auto REC)